您身边的电子制造服务提供商

RD-500V /SV 01005 Chip Rework Process

方案概述

凯意

● Placement Procedure :

  1. Tape the stencil to the 01005 Feeder and spread the solder paste with Squeegee to 01005 Feeder (See Fig 5 & 6)

凯意

2. Tape the stencil marked A

凯意

3. Remove the stencil and set the feeder to RD-500V.

凯意

4. Turn the knob to the counter clockwise rotation then remove the film of 01005 Chip.

凯意

5. Click camera button and deploy the optical arm then adjust the 01005 chip is in the tip nozzle.

凯意

6. After click camera button then the optical arm will be gone back to home position, Click pick up button then 01005 chip will be picked up by the passive components tip nozzle.

7. Click camera and adjust the 01005 chip with applied solder paste for dipping.

凯意

8. Click Optics arm then click dipping button. 01005 chip with tip nozzle will go down and dipped solder paste.

9. Set your PCB on the PCB holder then adjust the 01005 chip is in the pattern of PCB.

凯意

10. Click Tool → Chip → Placement or Removal then start the profile.

凯意

■01005 profile for 01005

Note: You can change the profile detail, if you need.

凯意

11. After the placement of 01005 Chip (see Fig 19

凯意

11. After the placement of 01005 Chip (see Fig 19

凯意


The easy select mode function is simple rework process.

You can change the detail of profile as follows;


Nozzle height

IR temperature

Placement force

Vacuum ON/OFF

Add the zones of profile.

Cleaning 01005 chip nozzle 

If the tip nozzle clogged, clean it with cleaning pin.

    1.Remove the 01005 tip nozzle then clean it with alcohol.

    凯意

    2. Clean the hole clogged up with the cleaning pin.

    凯意









返回

如果您对这项业界领先技术有兴趣了解,请联系:
Email:info@kanatc.com欢迎您的咨询!

最热评论